Skip to content

Black Friday Sale Early Access: 20% off & free shipping in United States over $89

Language

How to check your wireless IEM feed along your stage route

Walk your actual stage route at soundcheck with one cue you rely on. Have a bandmate log where it stays usable, where it changes, and which moves still need checking.

How to check your wireless IEM feed along your stage route

Black Friday Sale Early Access

Save up to 20% and get free shipping in United States on orders over $89.

Explore now

Your mix sounds fine at the mic stand. Then the second song takes you to the keys riser, or you turn toward the drummer for a count-in. The check at the mic stand didn’t tell you what you’d hear through either move.

Once your wireless in-ear mix is usable, ask the sound tech for a short pass through your stage route and have a bandmate take notes. You’re checking whether you can still use one cue you need for the set, not trying to diagnose the wireless rig while you walk.

1. Pick the moves your set actually requires

Look at the setlist and start with three moves you know you’ll make. Think in song cues rather than areas of the stage. “Walk to the keys riser during the last chorus” gives you something you can repeat. “Check the back of the stage” doesn’t tell you where to start, which way to face, or where to stop.

  • Check a crossing. Walk from your mic stand to the keys riser by the path you’ll use during the song, around the stands and pedals that are already in place.
  • Check a turn. At stage left, turn toward the drummer as you would to catch a count-in. Start from the direction you’ll actually be facing.
  • Check a return. Head back to your mic after the instrumental break and stop where you’ll sing the next line. Listen on the way back as well as at the stand.

If you don’t travel far, check the small moves that matter: turning away from the mic to cue the band, stepping over to a pedal, or changing position for an instrument swap. Mark your starting position, turns, and stops, plus any planned move away from your main stage position, even if you won’t have time to check it.

2. Walk the route with one cue and a note sheet

Clip the receiver bodypack where you’ll wear it for the set, route the cable as you normally would, and carry or wear your instrument if it’s part of the move. Don’t hold the pack in your hand if it’ll be on the back of your belt during the show.

Pick one recognizable cue you rely on, such as your usual click. Ask the tech to keep it going during the walk at a comfortable level. At your starting spot, check that you can follow it. Then walk at show pace, face the way you would in the song, and pause where you’d play, sing, or take a cue. Listen through each crossing, turn, and stop. If you’re using a click, ask yourself whether you can still follow the beat, not just whether you hear something in your ears.

Have your bandmate list each planned checkpoint before you walk. As you finish each move, call out what you heard and have them log usable passes as well as changes. If the cue crackled, disappeared, or changed in one ear, tell them exactly where you were and which way you were facing. Leave any skipped checkpoint marked “not checked.”

Copyable note sheet

Song or move Location and facing Cue Observation
Starting position Mic stand, facing front Usual click Usable
Turn for count-in Stage left, turning toward drummer Usual click Changed or missing: cut out mid-turn
Last chorus crossing Mic stand to keys riser, stopping at keys Usual click Not checked

Use one row per checkpoint and mark it “usable,” “changed or missing,” or “not checked.” If the band is still sorting out which cues belong in each mix, use the hybrid monitor soundcheck checklist before you walk.

3. Report what changed, then rewalk the route

Give the tech a location, a movement, and what you heard: “The feed cut out twice as I turned toward the drummer at stage left.” If it came back when you faced front, say that too. If it happened only once, say so rather than calling it a dead spot. Show the tech the specific move instead of just pointing to the spot. For more on the handoff, see how to describe an IEM problem when you need help.

After the crew addresses it, go back to the original starting position and repeat the same route with the same cue. Keep the path, pace, turns, and stops the same. Have your bandmate record the result at each checkpoint as a second pass so you can compare it with the first.

Before the set, flag any required move that still hasn’t been checked or where the cue still isn’t usable. If the problem persists, agree on a fallback with the tech and band. You might take a different path to the riser or catch the drummer’s cue from a position you’ve checked. Walk any replacement route with the same cue before relying on it.

A clean pass tells you what you heard on that route under soundcheck conditions. It doesn’t diagnose a dropout or guarantee the feed will stay the same during the show. At your next gig, pick three moves from the setlist and walk them before you leave soundcheck.

About Soundbrenner

We're on a mission to make music practice addictive. Our products are the ultimate companion for every practice session. And they're made for you. We serve all musicians, across all instruments and from beginners to professionals. Click here to learn more.

Do you have a question about Soundbrenner or our products? Contact us, we'd love to hear from you!

Read this next

The Metronome app

Make music practice addictive. Try it free.

Bestsellers

Pair of black wired Wave in-ear monitors with cable, viewed from the side by side
Wave 1 in-ear monitors

3,711 reviews

$139

$72

Bestseller Wave Pro 2 in-ear monitors in gunmetal with professional audio magazine award badge
Wave Pro 2 in-ear monitors

1,295 reviews

$349

$187

Bestseller Black Pulse vibrating metronome with a round face and adjustable wrist strap
Pulse vibrating metronome

656 reviews

$119

$95

Core 2 practice companion smartwatch in stone gray showing time and battery on screen
Core 2 practice companion

574 reviews

$229

$183